СНЯТ С ПРОИЗВОДСТВА

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

СНЯТ С ПРОИЗВОДСТВА

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

СНЯТ С ПРОИЗВОДСТВА

Pump and 3-phase AC motor class Premium are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

СНЯТ С ПРОИЗВОДСТВА

Pump and 3-phase AC motor class "Premium" EFF1 are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

СНЯТ С ПРОИЗВОДСТВА

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Наименование продукции -  NK 100-315/279
Частота вращения - 1450 об/м
Мощность двигателя P2 - 15 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 2960 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 970 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 1450 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Pump and 3-phase AC motor class standart are mounted
as separate units on a common baseplate and
connected via a Spacer-coupling.
The impeller is hydraulically as well as
dynamically balanced.
The pump has the following characteristics:
- flange dimensions according to
EN 1092-2,
- Cast iron volute
pump housing,
- stainless steel shaft
and Cast iron impeller
and bronze wear rings,
- unbalanced mechanical shaft seal
according to EN 12756.

Speed for pump data: 970 rpm
Shaft seal: BAQE
Materials: Pump housing: Cast iron
EN-GJL-250 DIN W.-Nr.
A48-40 B ASTM
Impeller: Cast iron
EN-GJL-200 DIN W.-Nr.
A48-30 B ASTM
Material code: A
Installation: Maximum ambient temperature: 40 °C
Pressure stage: PN16
Liquid: Liquid temperature range: 0 .. 120 °C
Rated voltage: 3 x 380-415 D / 660-690 Y V
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Motor protec: PTC
Motor range: Standard

Наименование продукции -  NK 100-315/295
Частота вращения - 1450 об/м
Мощность двигателя P2 - 18.5 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Наименование продукции -  NK 100-315/312
Частота вращения - 1450 об/м
Мощность двигателя P2 - 22 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Наименование продукции -  NK 100-200/170
Частота вращения - 2900 об/м
Мощность двигателя P2 - 30 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Наименование продукции -  NK 100-200/181
Частота вращения - 2900 об/м
Мощность двигателя P2 - 37 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Наименование продукции -  NK 100-200/192
Частота вращения - 2900 об/м
Мощность двигателя P2 - 45 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Наименование продукции -  NK 100-200/203
Частота вращения - 2900 об/м
Мощность двигателя P2 - 55 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Несамовсасывающий насос Grundfos NK 100-200/219
Номинальное напряжение - 3 x 380-420D/660-725Y V
Номинальная мощность - P2 - 75 кВт
Номинальный ток - 134-122/76,5-70,0 A
Допустимое давление - PN 16
Частота вращения - 2970 об/мин
Нетто вес - 945 кг

Наименование продукции -  NK 100-315/334
Частота вращения - 1450 об/м
Мощность двигателя P2 - 30 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Наименование продукции -  NK 100-315/269
Частота вращения - 2900 об/м
Мощность двигателя P2 - 110 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Наименование продукции -  NK 100-315/284
Частота вращения - 2900 об/м
Мощность двигателя P2 - 132 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Наименование продукции -  NK 100-315/301
Частота вращения - 2900 об/м
Мощность двигателя P2 - 160 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Наименование продукции -  NK 100-315/322
Частота вращения - 2900 об/м
Мощность двигателя P2 - 200 кВт
Трубное присоединение, входной фланец - DN 125
Трубное присоединение, выходной фланец - DN 100
Допустимое давление - PN16
Торцевое уплотнение - BAQE

Grundfos NK 100-250/274 EUP A2-F-A-E-BAQE 1450 об/мин

Grundfos NK 100-400/334 EUP A2-F-A-E-BAQE 1450 об/мин

Grundfos NK 100-400/360 EUP A2-F-A-E-BAQE 1450 об/мин

Grundfos NK 100-400/385 EUP A2-F-A-E-BAQE 1450 об/мин

Grundfos NK 100-400/395 EUP A2-F-A-E-BAQE 1450 об/мин

Grundfos NK 100-400/415 EUP A2-F-A-E-BAQE 1450 об/мин

Grundfos NK 100-160/160-154 EUP A2-F-A-E-BAQE 2900 об/мин

Grundfos NK 100-160/167 EUP A2-F-A-E-BAQE 2900 об/мин

Grundfos NK 100-160/176 EUP A2-F-A-E-BAQE 2900 об/мин

Grundfos NK 100-250/205 EUP A2-F-A-E-BAQE 2900 об/мин

Grundfos NK 100-250/229 EUP A2-F-A-E-BAQE 2900 об/мин

Grundfos NK 100-250/242 EUP A2-F-A-E-BAQE 2900 об/мин

Grundfos NK 100-250/258 EUP A2-F-A-E-BAQE 2900 об/мин

Grundfos NK 100-250/274 EUP A2-F-A-E-BAQE 2900 об/мин